ABSOLUTE TOOLING Get a quote
Home / Products / Single-Point Punch
Single-Point Punch 018
Single-Point Punch

Single-Point Punch 018

Hardened and profile-ground press brake tooling. Supplied to match your clamping system and bend radius; custom geometry available on request.

Catalogue ref.ABS-UD-018
SpecEnvelope 500 × 150 × 26 mm
SpecSection 150 × 26 mm
Material42CrMo / Cr12MoV, hardened 50–58 HRC
Tolerance±0.01 mm
Lead time2–3 weeks
AmadaWilaTrumpfLVDBystronic

About this tooling

A single sharp edge for one-direction bends and short flanges, where a full radius punch would foul the part.

FAQ

Can it be supplied with a custom tip radius?
Yes — tip radius is ground to your drawing, typically R0.2 to R3.

Request a quote
Related

More from this range

Double-Point Punch 001 sectionDouble-Point Punch 001
Double-Point Punch

Double-Point Punch 001

Envelope 500 × 124 × 26 mm
Bent-Blade Punch 002 sectionBent-Blade Punch 002
Bent-Blade Punch

Bent-Blade Punch 002

Envelope 500 × 120 × 60 mm
Right-Angle Die 003 sectionRight-Angle Die 003
Right-Angle Die

Right-Angle Die 003

Envelope 300 × 135 × 60 mm
Double-Point Punch 004 sectionDouble-Point Punch 004
Double-Point Punch

Double-Point Punch 004

Envelope 500 × 144 × 26 mm